Nbfs System Messages - Brocade Communications Systems 8 Reference

NBFS System Messages

NBFS-1001
Message
<timestamp>, [NBFS-1001], <sequence-number>,, INFO, <system-name>, Duplicate
E_Port SCN from port <portnumber> in state <state change name> (<state change
number>)
Probable Cause Indicates a duplicate E_Port State Change Number was reported. The neighbor finite state machine
(NBFSM) states are as follows:
•
•
•
•
•
•
Recommended No action is required.
Action
Severity INFO
NBFS-1002
Message
<timestamp>, [NBFS-1002], <sequence-number>, FFDC, ERROR, <system-name>, Wrong
input: <state name> to neighbor FSM, state <current state name>, port <portnumber>
Probable Cause Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states
are as follows:
•
•
•
•
•
•
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it
Action is FULL, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.
Fabric OS Message Reference
53-1001767-01
0 - Down
1 - Init
2 - Database Exchange
3 - Database Acknowledge Wait
4 - Database Wait
5 - Full
0 - Down
1 - Init
2 - Database Exchange
3 - Database Acknowledge Wait
4 - Database Wait
5 - Full
Chapter
71
445