Setting Up Snmp Communities - Lucent Technologies Cajun P220 Operation Manual

Setting Up SNMP Communities

SNMP communities are the SNMP values that an SNMP manager uses to manage the
switch. SNMP Version 2c is supported.
Parameter
Community String
IP Address
Access
Security Level
Trap Receiver
To set SNMP communities:
1. In the System Configuration section of the Web Agent window, select SNMP
Administration. The SNMP Community Management dialog box opens.
2. Click CREATE. The Create SNMP Community dialog box opens.
3. In the Community String field, enter a community name.
4. From the IP Address pull-down menu, select Any for any IP address or Specific
and enter an IP Address in the appropriate fields.
Cajun P550/P220 Switch Operation Guide
Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
Table 3-14. SNMP Communities Parameters
Definition
This string serves as a password that you enter at the
network management station. It provides the level of
access to the switch that you specify on this page.
Allows you to send SNMP responses only to a station
with any or a particular IP address.
Helps provide security when you use SNMP to
manage the network from a single workstation. Refer
to Table 3-15 for more information on Access options.
The default value is Read-Write.
Allows you to select the security level for this
community string. Refer to Table 3-16 for more
information on security level options. The default
value is Normal.
Allows you to enable or disable the transmission of
traps to the selected IP address. The default value is
Disable.
3-23