Set License Command; Set Snmp Community Command - Lucent Technologies CAJUN P120 User Manual

Chapter 7 Cajun Campus CLI (Command Line Interface)

Set License Command

Use the set license command to install an application Software License.
The syntax for this command is: set license
Example:
Console> set license XXXX XXXX XXXX XXXX XXXX XXXX
Application
------------
SMON

Set SNMP Community Command

Use the set snmp community command to set SNMP communities and
associated access types.
There are two configurable SNMP communities, one for each access type.
The syntax for this command is:
set snmp community <read-only|read-write> [community_string]
read-only|trap
read-write
community_string
The default configuration has the following communities and access types defined:
public---read-only
public---read-write
Example:
To set read-write access to the SNMP community called apple:
Console>(enable) set snmp community read-write apple
SNMP read-write community string set.
Console>(enable)
88
License Key
------------------------------------
XXXX XXXX XXXX XXXX XXXX XXXX
Assign read-only and trap access to the specified SNMP
community.
Assign read-write access to the specified SNMP
community.
(Optional) Name of the SNMP community.
Cajun P120 User's Guide