Chapter 6 - Configuring Ipx Sap Protocol (Layer 3); Overview; Configuring Ipx Sap Interfaces - Lucent Technologies Cajun P220 Operation Manual

6
Configuring IPX SAP Protocol
(Layer 3)

Overview

This chapter and its procedures are specific to Layer 3 configuration.
Included in this chapter:

Configuring IPX SAP Interfaces

Creating IPX SAP Filters
Interpreting IPX SAP Interface Statistics
Configuring IPX SAP Interfaces
To configure the IPX SAP interfaces:
1. In the IPX SAP Configuration section of the Web Agent window, click
Interfaces. The IPX SAP Interfaces dialog box opens.
2. Use Table 6-1 to configure the IPX SAP interfaces:
Parameter
Select
Interface
Network Number
Use Interpacket Gap
Cajun P550/P220 Switch Operation Guide
Table 6-1. IPX SAP Interface Parameters
Allows you to...
Select a SAp interface to modify.
Identify the IPX interface associated with the SAP interface.
Identify the number of the IPX network associated with the
interface.
Select whether or not SAP updates sent out over an interface
have an interpacket transmission delay.
• If enabled, IPX SAP provides update packets.
• If disabled, IPX SAP periodic update packets have no
interpacket gap.
6-1