....................................................................................................................................................................................................................................

Purpose

When to use

Related information

Admonishments

Before you begin

Procedure

235-200-118

Issue 3.02B, March 2007

SCTP Endpoint Parameters (RC/V 33.18) defines the SCTP endpoint

related timers and protocol parameters.

A default (DEFAULT) parameter set is defined when either the first

SCTP near endpoint is provisioned or when the first non-DEFAULT

SCTP endpoint parameter set is provisioned. This procedure should be

followed to create a new parameter set, or to modify individual

parameter values (within the allowable ranges for each parameter) that

are different (non-default) from the default value.

Refer to 235-118-258, Recent Change Reference, for information on

the RC/V system.

The parameters and timers in this form have default values. Changing

any parameter or timer could cause an interruption in service. Care

should be taken when changing the predefined values.

Required Tools

•

Supplemental Trunk Line Workstation (STLWS) or Recent

Change and Verify (RC/V) terminal

•

Access to RC/V Menu Interface

Required Material

•

The 5ESS

release with the SIP for Packet Trunking - NAR feature software.

Required Information

•

SCTP Endpoint Parameter Set Name.

Required Conditions

•

Secured Feature 684 is enabled (RC/V 8.22)

•

SIP GSM is defined (RC/V 5.80)

............................................................................................................................................................

Select and prepare terminal for RC/V activities.

Lucent Technologies

switch must be running a 5E16.2 FR3 software

Provisioning

5 - 5 3

Table of Contents