Conductix-Wampfler ProfiDAT compact Mounting Instructions page 85

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
→ Position the data rail (8) at the drilling
jig.
→ To release the drilling device, open the
eccentric tappet (9) (A) and loosen the
adjustment nut (10) (B).
MAL0515-0001i-EN
www.conductix.com
5
7
Fig. 104: Remove step drill (5) with tightened adjusting ring (7) from drilling hole.
8
Fig. 105: Position data rail (8)
9
A
8
10
Fig. 106: Open/loosen eccentric tappet (9) and adjustment nut (10)
Translated from MAL0515-0001k-DE
6
B
Page 85 of 169