Conductix-Wampfler ProfiDAT compact Mounting Instructions page 119

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
7 Operation
7.1 WLAN channel usage
When using the "iPCF" function, it is imperative to ensure that the WLAN channels used for the ProfiDAT
available for ProfiDAT compact and are not used by any other device in the local area.
®
Even minor disturbances due to the "iPCF" functionality can lead to a negative influence on the communication.
The WLAN channels used for ProfiDAT
7.2 Safety
Risk of injury due to
improper operation!
Unauthorized personnel
are at risk!
Electrical
Do not exceed the nominal voltage specified in Section 3! The data transmission system can be overloaded due to excessive
current or voltage. Risk of fire and/or destruction of the data transmission system!
Personnel:
The system may only be operated by trained personnel!

Personal protective equipment (these items must be worn during all work):
Protective clothing

Protective footwear

MAL0515-0001i-EN
www.conductix.com
compact can be found in the project-specific documentation.
®
Improper operations can result in serious personal injury and material damage.
→ Conduct all operating steps according to the specifications of these mounting instructions.
→ Before starting work, ensure that all covers and safety systems are installed and working
properly.
→ Never disable the safety systems during operation.
→ Maintain order and cleanliness in the work area! Loosely stacked or scattered components
and tools are a source of accidents.
Unauthorized persons who do not meet the requirements described here are not
acquainted with the dangers in the work area!
→ Keep unauthorized persons away from the work area.
→ In case of doubt, address the person and direct them away from the work area.
→ Stop working as long as unauthorized persons are in the work area.
Translated from MAL0515-0001k-DE
compact are exclusively
®
Page 119 of 169