Conductix-Wampfler ProfiDAT compact Mounting Instructions page 166

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
10.2.1 Disassembly of the assemblies
DANGER!
Personnel
May only be carried out by trained technicians

Min. 2 persons

Required tools
Open-end wrench SW8 (M5)

Open-end wrench SW10 (M6)

Open-end wrench SW13 (M8)

Cordless drill driver

Torx attachment TX8

Tools for securing

10.3 Disposal
In the absence of return and disposal agreements, recycle the disassembled components:
All metal parts must be scrapped

Plastic components must be sent for recycling

All other components are to be disposed of according to their material composition.

Environmental damage due to improper disposal!
Electrical scrap, electronic components, lubricants, and other auxiliary materials are subject to
hazardous waste treatment and may only be disposed of by authorized specialists!
CAUTION!
Local authorities or disposal specialists can provide information regarding environmentally appropriate disposal.
MAL0515-0001i-EN
www.conductix.com
Risk of fatal injury due to falling parts!
Falling parts can cause serious injuries or even death.
There is a risk of components falling down while disassembling the data transmission
system. These can lead to extremely serious injuries or even death.
→ Secure all components against falling during disassembly work.
→ Never walk underneath the disassembly area.
→ Cordon off the disassembly area.
Translated from MAL0515-0001k-DE Page 166 of 169