Conductix-Wampfler ProfiDAT compact Mounting Instructions page 123

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
8.2.3 Replacement of the sliding contacts
Work steps:
→ Pull off the angled blade receptacle (1) of the PE cable (see Fig. 147).
1
Fig. 147: Pull off angled blade receptacle
→ Pull the data cable so that the collector head can be better loosened from the joint (see Fig. 148 and Fig. 149).
Pull
Push
Fig. 148: Pull data cable (HF cable) (loop from above)
MAL0515-0001i-EN
www.conductix.com Translated from MAL0515-0001k-DE Page 123 of 169