Conductix-Wampfler ProfiDAT compact Mounting Instructions page 74

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
6.4.5 Mount the ProfiDAT
The first ProfiDAT compact rail is to be mounted at the beginning of the line feed. The system must also be completed with a line
®
feed (stationary antenna) at the end.
Work steps:
1
Fig. 75: ProfiDAT ®
compact
rail
→ Mount the ProfiDAT compact rail (1) into the hanger clamp (2). Ensure that the hanger clamp grips the rail correctly. The
®
hanger clamps are elastic and thus allow easy insertion/locking of the rail into the hanger clamp. The rails can be moved in the
hanger clamps.
→ Mount all other rails into the hanger clamps in the same way.
6.4.6 Mount connectors
The individual rails are connected to one another via connectors.
PE connectors are used to connect the PE cable. These are mounted according to the Layout Plan at the beginning or end of the
system and at every 5th connection point.
Work steps:
1
3
Fig. 77: Mount connector onto ProfiDAT
MAL0515-0001i-EN
www.conductix.com
compact rail
®
3
2
compact rail
®
Translated from MAL0515-0001k-DE
2
Fig. 76: Mount rail (from front)
1
Fig. 78: Mounting aid at connection point
2
3
2
Page 74 of 169