Conductix-Wampfler ProfiDAT compact Mounting Instructions page 13

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
2.6 Unintended use
Claims of any kind due to damage incurred during use that deviates from the intended use described above ("use other than the
intended use") are excluded.
The operator bears sole liability for all damage that results from unintended use.
WARNING!
Unintended use particularly includes the following forms of use:
Operation outside the specified operating conditions (see Section 3.6).

Use of the rail for the transmission of power.

Use where there is a risk of explosion ("Ex" areas).

Use of the transceiver without a rail.

Use of the rail without adequate protection.

Operation in areas that require a higher protection class than IP23.

Use of the system parallel to a conductor rail system from manufacturers and/or types not approved by Conductix-Wampfler.

Use of the system with accessories that are not approved and not authorized by the manufacturer.

Use of the system by untrained personnel.

Environmental conditions
compact Data Transmission System may only be operated under the environmental conditions described in
The ProfiDAT
®
Section 3.
compact Data Transmission System may not be operated under the following environmental conditions:
The ProfiDAT
®
Ambient temperatures below -20° C and above +55° C.

Temperature difference may not exceed 40 K.

Outdoor areas (natural/solar UV radiation, wind, humidity).

Installation site at elevations higher than 2000 m above sea level.

MAL0515-0001i-EN
www.conductix.com
Danger due to unintended use!
Any application that deviates from or goes beyond the intended use of the equipment can
result in hazardous situations.
→ Strictly follow all information in these mounting instructions.
→ Refrain from unintended use of the system.
Translated from MAL0515-0001k-DE Page 13 of 169