Conductix-Wampfler ProfiDAT compact Mounting Instructions page 48

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
6 Installation and Commissioning
6.1 Safety
Personnel:
Installation and commissioning may only be carried out by specially trained technicians!

Wear the following personal protective equipment for all installation and commissioning work:
Protective clothing

Protective headgear

Protective footwear

Protective gloves

DANGER!
Risk of injury due to
improper installation and
initial commissioning!
MAL0515-0001i-EN
www.conductix.com
Risk of death due to suspended loads!
Falling loads can cause serious injuries or even death.
→ Never walk under suspended loads.
→ Only move loads under supervision.
→ Set down the load before leaving the work area.
Improper installation and initial commissioning can result in serious personal injury and/or
material damage.
→ Before starting work, ensure sufficient space for installation.
→ Use caution when working with open, sharp-edged components.
→ Ensure that the installation area is clean and tidy! Loosely stacked or scattered components
and tools are a source of accidents.
→ Install components properly. Comply with the specified tightening torques.
Translated from MAL0515-0001k-DE Page 48 of 169