9.4.6
Setting Initial Value of 16-Bit Timer Output
Any desired value can be specified for the initial 16-bit timer output value when a timer count
operation is started by making a setting in TOLR.
Figure 9.32 shows the timing for setting the initial output value with TOLR.
Only write to TOLR when the corresponding bit in TSTR is cleared to 0.
T
T
T
1
2
3
φ
TOLR address
Address bus
N
TOLR
ITU output pin
N
Figure 9.32 Example of Timing for Setting Initial Value of 16-Bit Timer Output by Writing
to TOLR
330