Table of Contents
Advertisement
• Phase counting mode selectable in channel 2
Two-phase encoder output can be counted automatically.
• High-speed access via internal 16-bit bus
The 16TCNTs and GRs can be accessed at high speed via a 16-bit bus.
• Any initial timer output value can be set
• Nine interrupt sources
Each channel has two compare match/input capture interrupts and an overflow interrupt. All
interrupts can be requested independently.
• Output triggering of programmable timing pattern controller (TPC)
Compare match/input capture signals from channels 0 to 2 can be used as TPC output triggers.
Table 9.1 summarizes the 16-bit timer functions.
280
Advertisement
Table of Contents
