Table of Contents
Advertisement
Page 94 of 532
Software requirements
553-3001-367
Standard 1.00
Note 1: When equipped with a Display module, Meridian
Communications Adapter (MCA), or Meridian Programmable Data
Adapter (MPDA), key 07 is automatically assigned as the Program key
and cannot be changed. Key 05 becomes the Program key on the M2006
if equipped with the MCA or MPDA.
See "M2000 data options" on
MCA and MPDA.
Note 2: The M2006 is a single-line telephone and accepts only one DN.
The remaining five key/lamp pairs can be assigned any feature that is not
considered a DN, such as Transfer, Call Forward, or Conference.
Features that cannot be assigned are those that are considered DNs -
Voice Call and two-way Hot Line, for example. Attempting to assign
more than one DN to the M2006 causes the telephone to disable itself and
all LCDs light steadily. It returns to its normal operating state when a
service change removes all secondary DNs.
LCD indicators support four key/LCD states:
Function
idle
active
ringing
hold
* An indicator fast flashes when a feature key is pressed but the
procedure necessary to activate the feature has not been completed.
Data Options
See "M2000 data options" on
and MCA.
The option number for the M2000 Series Meridian Digital Telephones is 170.
The mnemonic is ARIE. DSET package 88 and TSET package 89 are
required.
October 2003
page 193
for more information on the
LCD state
off
on (steady)
flash (60 Hz)
fast flash (120 Hz)
page 193
for more information on the MPDA
Advertisement
Table of Contents
