Isuzu Tilt Slide FYJ2000 Instruction Manual page 88

2-56
IMPORTANT INFORMATION
Performing regular inspections and maintenance prevents damage. Be sure to perform
inspections and maintenance at regular intervals. Also, quickly rectify any fault in the
vehicle (even a small fault) to prevent it from becoming more serious.
If a symptom shown in the following table occurs, perform inspections and take
corrective action in accordance with the table.
If you are unable to perform a repair, the corrective action shown in the table does not
eliminate a symptom or you can't locate a fault, contact the nearest Isuzu Dealer.
Symptom
Engine not sufficiently warming up
Too much engine oil
Engine control system faulty
Fuel system faulty
White
exhaust
smoke
Continuous idling for a long period
(more than two hours)
Engine control system faulty
Black
Air cleaner clogged
exhaust
smoke
Fuel system faulty
Exhaust system clogged
ADVICE
• Any item for which there is a
repairs and adjustments. Contact the nearest Isuzu Dealer.
Inspection and Maintenance
Cause
in the "Corrective action" column requires
Corrective action
Allow the engine to warm
up.
Correct the oil level.
With the vehicle
stationary in a place
where it will not obstruct
traffic, hold down the
accelerator pedal and
check that white smoke
is not emitted.
Clean or replace the
element.
Reference
page
―
7-21
―
―
―
―
7-31
―
―