Isuzu Tilt Slide FYJ2000 Instruction Manual page 172

4-44
CONTROLS AND INSTRUMENTS
Turn Signal and Hazard Warning Flasher Indicator Light
ADVICE
• These indicator lights will not flash if the bulbs are blown, or may flash
abnormally if bulbs of incorrect wattage are used.
Either of these indicator lights flashes
when the turn signal switch is operated
irrespective of the position of the starter
switch.
Both indicator lights flash when the
hazard warning flasher switch is operated
irrespective of the position of the starter
switch.
Turn Signal Light Switch
High Beam Indicator Light
This indicator light comes on when the
head lights are on high beam or are turned
on for high beam flash (passing signal).
Light Control Switch
→ Refer to page 4-57
→ Refer to page 4-55