Isuzu Tilt Slide FYJ2000 Instruction Manual page 552

Table of Contents

Advertisement

8-24
IN CASE OF EMERGENCY
1. Check the bulbs for blowout.
2. If the bulb is blown out, replace it. Always place the starter switch in the "LOCK"
position and place all the other switches in the "OFF" position before replacing
the blown bulbs.
3. If the bulb is not blown out, the fault may be in the wiring. Contact the nearest
Isuzu Dealer.
Position
Halogen headlight
High beam/low beam
Fog light
Front
Turn signal light (front)
Clearance light
Turn signal light (side)
Taillight and stop light
Turn signal light
Rear
Back up light
License plate light
Dome light
Interior
Interior light (fluorescent light)
Roof
Front end outline marker light
Contact the nearest Isuzu Dealer when replacing lights that aren't listed here.
When the Bulb Does not Come On
Bulb Wattage
Lights
V
2-lights type
1-light type
V
V
Bulb wattage
75/70W
70W
21W (Amber)
5W
21W (Amber)
5/21W
21W
21W
5W
10W
10W
20W
5W

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents