Isuzu Tilt Slide FYJ2000 Instruction Manual page 341

SERVICE AND MAINTENANCE
Lowering the Cab
1. Set the pump lever in the "lower
(drive)" position (1). A buzzer will
sound.
• Do not stop lowering the cab mid-
way except in an emergency. Doing
so may cause the cab tilt mechanism
to break down.
• Never get under a cab that was
stopped mid-way during lowering.
The cab may drop down.
• Make sure that no part of your body
is beneath the cab while it is being
lowered. You may get caught under
the cab.
2. Press the tilt switch (2) until the cab
has been lowered completely. You
no longer hear the motor operating,
release the switch.
3. Raise the tilt lock lever (3) until the
lock lever (4) catches.
4. When the tilt lock lever (3) is securely
locked, the warning buzzer will stop.
Place the starter switch in the "ON"
position and make sure that the
warning message does not come on.
• After the cab is lowered to the
original position, be sure to maintain
the pump lever in the "lower (drive)"
position and lock the cab by using
the cab lock system.
Cab Tilt Warning Light
WARNING
CAUTION
→ Refer to page 4-43
7-13