Isuzu Tilt Slide FYJ2000 Instruction Manual page 203

Manual Transmission Model (9 Speeds)
ZF9S1310 model transmission
single-H shift pattern
Low range
High range
CONTROLS AND INSTRUMENTS
ZF9S1310 Model Transmission with
Single-H Shift Pattern
A total of 9 forward gears are available from
the low and high speed ranges, the low
range providing 5 gears consisting of "1 (1st
gear)" to "4 (4th gear)" gears plus the "C1
(crawler 1)" gear, and a "R1 (reverse 1)",
while the high range providing 4 speeds
from "5 (5th gear)" to "8 (8th gear)", "C2
(crawler 2)" and "R2 (reverse 2)".
Fully depress the clutch pedal before
shifting into any gear.
• Shift into "C (crawler)" or "R
(reverse)" only after the vehicle has
come to a complete stop.
The high range shares the same gearshift
pattern with the low range. The selector
switch on the gearshift lever is used to
make the switch between the low and high
ranges.
• The gear ratio of the "C2 (crawler 2)"
gear is between "3 (3rd gear)" and
"4 (4th gear)". The gear ratio of the
"R2 (reverse 2)" gear is between "4
(4th gear)" and "5 (5th gear)".
Model with ZF9S1310 Model Manual
Transmission
V
CAUTION
NOTE
V
→ Refer to page 4-80
4-75