Isuzu Tilt Slide FYJ2000 Instruction Manual page 386

7-58
SERVICE AND MAINTENANCE
FG941 (MFS66) /RS23/RT40 Type Axles
Camshaft Bushing
ADVICE
• It is recommended that when installing a new camshaft you also replace the
camshaft bushing with a new one.
1. Inspect and grease the camshaft according to the maintenance schedule.
CAUTION
• If grease oozes out from the seal in the vicinity of the cam head, replace the
seal.
• Remove grease and oil from the cam head, roller and lining.
• Be sure to replace the oil-stained lining.
• If there is grease on the lining, the vehicle stopping distance may increase.
This may cause a serious accident resulting in injury or death or damage to the
components of the brake system.
2. Apply grease via the fitting on the bracket or the spider until the new grease
oozes out from the inner seat.
Automatic Slack Adjuster
Inspect and grease the automatic slack adjuster according to the maintenance
schedule. Also, be sure to inspect and grease it after replacing the brake lining.
Anti-seize Compound
1. Apply anti-seize compound to the clevis pins of all of the automatic slack
adjusters.
2. Normal automatic adjustment: If there is no grease groove and hole on the inner
periphery of the automatic slack adjuster gear, apply anti-seize compound to the
automatic slack adjuster and the cam spline.
Checking the Slack Adjuster
MER