Isuzu Tilt Slide FYJ2000 Instruction Manual page 211

CAUTION
• Fully depress the clutch pedal before operating the gearshift lever.
• Do not change to the low range at 30 km/h (19 MPH) or higher speeds. Doing
so may cause a failure in the transmission.
• The gearshift lever is harder to move when the transmission temperature is still
low. If high-to-low range group switching is impossible when making a downshift
from the 5th/6th gear (5/6) gate to the 3rd/4th gear (3/4) gate, slow down the
vehicle and then select a gear appropriate for the lower vehicle speed.
NOTE
• If low-high range switching becomes impossible
- If low-to-high range switching is impossible, you can still drive the vehicle.
Have your vehicle inspected at the nearest Isuzu Dealer promptly.
- If high-to-low range switching becomes impossible, you cannot drive the
vehicle. Immediately stop your vehicle at a safe place and contact the nearest
Isuzu Dealer.
CONTROLS AND INSTRUMENTS
Shifting gears from 3rd/4th to 5th/
6th (Double-H Shift Pattern Model)
When moving the gearshift lever from the
3rd/4th gear (3/4) gate into the 5th/6th gear
(5/6) gate or vice versa, tap the lever with
your palm lightly (do not use undue force)
to move the lever quickly toward the target
gear position.
4-83