Isuzu Tilt Slide FYJ2000 Instruction Manual page 153

NOTE
• If you want to cancel the setting procedure, press the MID select knob
momentarily. The display goes back to the screen that was displayed just before
entering the setting change screen.
MJT7 model transmission
ZF9S1310 model transmission
RTO-11908LL model transmission
CONTROLS AND INSTRUMENTS
How to Set a New Change Interval
(Odometer Reading) for Engine Oil
and Filter
1. On the MID, go to the ENG OIL &
FILTER screen.
2. Enter the setting change screen by
pressing and holding the MID select
knob.
3. Pressing and holding the MID select
knob sets the new change time
(distance).
How to Set a New Change
Interval (Odometer Reading) for
Transmission Oil, Fuel Filter and
Power Steering Fluid
1. On the MID, go to the screen for the
maintenance item for which you want
to adjust.
2. Enter the setting change screen by
pressing and holding the MID select
knob.
• If you want to cancel the setting
procedure, press the MID select
knob momentarily. The display
goes back to the screen that was
displayed just before entering the
setting change screen.
3. Pressing and holding the MID select
knob resets the new change interval
(distance).
NOTE
4-25