Isuzu Tilt Slide FYJ2000 Instruction Manual page 217

Setting Your Desired Vehicle Speed
Cruise control main switch
Cruise control main indicator light
Cruise control set switch
Cruise control set indicator light
CONTROLS AND INSTRUMENTS
1. Press the cruise control main switch
to the "ON" position. The cruise
control main indicator light will come
on.
2. Use the accelerator pedal to adjust
the vehicle speed. Upon reaching the
desired speed, turn the cruise control
set switch. The vehicle speed at the
moment you operate the switch is
set in the system, enabling you to
drive with the set speed automatically
maintained without using the
accelerator panel. The cruise control
set indicator light also comes on.
• When you use the exhaust brake,
the cruise control cannot be set.
Turn off the exhaust brake switch.
Exhaust Brake Switch
NOTE
→ Refer to page 4-60
4-89