Isuzu Tilt Slide FYJ2000 Instruction Manual page 405

Retightening Wheel Nuts (JIS 8-bolt Wheels)
Check the wheel nuts to be sure they are tightened to the specific torque by using a
torque wrench.
Use the following methods to check for loose wheel nuts. Tightening torque of the
wheel nuts may decrease after tire change or rotation due to their initial settlement.
After driving 50 to 100 km (31 to 62 miles), be sure to retighten the wheel nuts to the
specified torque.
Retightening of nuts on left rear
dual-tyre wheel
SERVICE AND MAINTENANCE
Single-tyre Wheel
Turn the wheel nuts in the tightening
direction to the specified torque.
Dual-tyre Wheel (Two-sequence
Procedure)
1. Loosen the outer wheel nuts of half of
the wheel bolts (see the figure).
2. Tighten the inner wheel nuts of the
same wheel bolts to the specified
torque.
Wheel nut tightening torque
(55 - 60 kgf·m/398 - 434 lb·ft) (wet)
550 - 600 N·m
7-77