Isuzu Tilt Slide FYJ2000 Instruction Manual page 192

4-64
CONTROLS AND INSTRUMENTS
ADVICE
• If windshield washer fluid does not come out in sufficient quantity, immediately
release the switch. Otherwise, the windshield surface may sustain damage.
• Do not hold the switch pressed for more than 30 seconds. Otherwise, the
washer pump may sustain damage.
• If windshield washer fluid does not come out, release the windshield washer
switch immediately. Otherwise the motor may seize up.
• When the vehicle is used in a cold-climate region, use washer fluid with
appropriate concentration for the season to prevent frozen fluid.
Windshield Washer Switch
Windshield washer fluid is sprayed over the
windshield when this switch is pressed. The
wiper also operates if your vehicle features
an intermittent windshield wiper function.
The windshield washer is used when
wiping the windshield clean.
Windshield Washer Fluid
CAUTION
• At extremely low temperatures,
washer fluid may freeze on the
windshield after being splayed,
obstructing your forward view. In
such a case, warm up the windshield
before using the windshield washer.
→ Refer to page 7-141