Isuzu Tilt Slide FYJ2000 Instruction Manual page 231

The dump control lever is used to raise or lower the dump body.
This section describes how to use the dump control lever of a dump truck.
For operation of the controls other than the dump control lever, please refer to the
separate "Instruction Manual for Dump Truck".
CAUTION
• While driving and during maintenance of the vehicle, be sure to place the dump
control lever in the "down" position. Make sure the dump control lever is held in
position by the lock button and does not move.
• When climbing into and out of the cab, never hold the dump control lever. Doing
so is very dangerous should the lever be moved accidentally.
Basic Operation of Dump Control Lever
CONTROLS AND INSTRUMENTS
Dump Control Lever
To Raise the Dump Body
1. Press the PTO switch to engage the
PTO.
2. Pull up the lever while pressing the
push button. The dump body will rise.
The lever is automatically locked
when the dump body reaches the fully
raised position.
PTO Switch→ Refer to page 4-102
4-103