Isuzu Tilt Slide FYJ2000 Instruction Manual page 430

7-102
SERVICE AND MAINTENANCE
Open the front lid and remove the cap from the clutch fluid tank to replenish the clutch
fluid to the "MAX" line.
CAUTION
• Before refilling the tank, clean the area around the cap and fill clutch fluid from
a clean container. Foreign objects getting in the tank will lead to a clutch system
failure.
• Clutch fluid melts paintwork and vehicle component materials such as plastic,
vinyl and rubber. It is also highly corrosive on metals. If it is spilled, immediately
wipe the area clean and wash away the fluid with water.
• Do not mix clutch fluid with fluids of a non-specified brand. Due to chemical
reactions, any mixture of differently branded fluids will cause failure of the clutch
system.
The clutch fluid must be changed according to the maintenance schedule. Since a
clutch fluid change requires disassembly of the related components, have this service
performed by your Isuzu Dealer.
If air is present in the clutch hydraulic system, the clutch may disengage incompletely.
Bleed the system if the clutch is used when the quantity of the clutch fluid in the tank is
extremely low or the clutch piping is disconnected during a maintenance operation. Do
not perform bleeding by yourself; it should be done with the help of another person.
Adding Clutch Fluid
Changing the Clutch Fluid
Bleeding the Clutch Hydraulic System
Maintenance Schedule
→ Refer to page 7-163
Recommended Fluids, Lubricants and
Diesel Fuels → Refer to page 7-188