Isuzu Tilt Slide FYJ2000 Instruction Manual page 348

7-20
SERVICE AND MAINTENANCE
Ease of Engine Startup, Abnormal Noises and
1. Make sure the parking brake is securely engaged. Step firmly on the brake pedal.
2. Confirm that the gearshift lever is in neutral ("N").
CAUTION
• For safety, firmly press the brake pedal before starting the engine.
3. Turn the starter switch to start the engine.
Check that the engine starts quickly with no abnormal noises.
4. After allowing the engine to warm up sufficiently, check the color of the exhaust
gas.
Checking the Condition of the Engine at Low Speeds and
Engine Conditions
Color of Exhaust Emissions
during Acceleration
Starting the Engine → Refer to page 4-4
1. Make sure the gearshift lever is in the
neutral ("N") position and the parking
brake is securely engaged.
2. Turn the starter switch to start the
engine, and run it to warm up.
Starting the Engine → Refer to page 4-4
3. Check that the engine is running at a
speed within the standard idle speed
range.
Note, however, that this excludes the
following condition:
• When the engine coolant
temperature is low
Idling Control Switch
→ Refer to page 4-54
4. Drive the vehicle, making sure the
accelerator pedal does not stick when
gradually accelerating, the engine
speed rises smoothly and the engine
does not knock.