Isuzu Tilt Slide FYJ2000 Instruction Manual page 321

TIPS ON SAFE AND SMOOTH OPERATION
Outside temperatures vs. oil
viscosities
Transmission Oil (ZF9S1310 Model Transmission)
When Starting the Vehicle in Cold Regions
The oil used in the ZF9S1310 transmission has a low-temperature limit. If you start
to drive the vehicle under the ambient temperature of below -15°C (5°F), replace
the transmission oil with an appropriate one which has sufficient low temperature
performance. Another approach is to warm the transmission before starting the engine.
When warming the transmission, do not use hot air with a temperature exceeding
130°C (266°F).
WARNING
• If you leave the vehicle with the engine running, be sure to apply the parking
brake to prevent the vehicle from rolling suddenly.
Using the Engine Coolant
To prevent the engine damage due to
freezing of the engine coolant, mix the
coolant and water to be an appropriate
concentration.
Changing the Engine Coolant
Preparing Engine Coolant
Replacing the Engine Oil
In all seasons, use Isuzu genuine "Besco
Clean" engine oil.
Changing the Engine Oil
Recommended Fluids, Lubricants and
Low Temperature Limits
→ Refer to page 7-42
→ Refer to page 7-39
→ Refer to page 7-25
Diesel Fuels → Refer to page 7 -188
→ Refer to page 7-175
6-21