Table of Contents
Advertisement
Changing the Transmission Oil
(RTO-11908LL Model Transmission)
WARNING
•
Before working on a vehicle, place transmission in neutral, set parking brake
and block wheels.
•
Never mix engine oils and synthetic transmission oils in the same transmission.
When switching between types of lubricants, all areas of each affected
component must be thoroughly drained.
•
Do not introduce additives and friction modifiers.
•
Do not mix lubricants of different grades.
•
Do not mix mineral and synthetic lubricants.
•
Do not mix heavy-duty, multi-purpose lithium based (#2 grade) grease with
Sodium based grease.
SERVICE AND MAINTENANCE
Drain Transmission
1. Put drain pan under drain plug at the
bottom of the transmission case.
2. Remove drain plug.
3. Clean and reinstall drain plug.
Drain plug tightening torque
61 - 75 N·m (6.2 - 7.6 kgf·m/45 - 55 lb·ft)
Fill Transmission
1. Remove transmission fill plug.
2. Fill with approved oil until the oil starts
flowing out of the fill hole.
3. Clean and replace fill plug.
Fill plug tightening torque
81 - 95 N·m (8.3 – 9.7 kgf·m/60 - 70 lb·ft)
(no sealant required)
(no sealant required)
7-109
- Quick Links:
- Vehicle Information
- Main Data
Hide quick links:
Advertisement
Table of Contents
