Isuzu Tilt Slide FYJ2000 Instruction Manual page 419

1. You must use wheel bolts specially produced for use with aluminum wheels.
2. Use only Isuzu genuine aluminum wheels.
3. After driving on a road where road chemicals are applied or on a coastal road,
thoroughly wash the wheels with water and then apply wax to prevent corrosion.
4. Aluminum wheels get scratched easily, so do not use a detergent containing
abrasive powder or a wire brush.
5. You must use a spare tyre carrier specially designed for aluminum wheels.
ADVICE
• Aluminum wheels get damaged if you tighten the wheel bolts and nuts to a
torque greater than the specified torque.
• Do not use wheel bolts for use with steel wheels on aluminum wheels, and vice
versa.
• If you use wheel bolts for aluminum wheels mixed with those for steel wheels
on a single wheel, poor fastening will result from inadequate seating and poor
screw engagement due to differences in shapes and lengths of these fasteners.
This may ultimately result in breakage of the wheel bolts and/or damage to the
disc wheel.
SERVICE AND MAINTENANCE
Aluminum Wheels
V
7-91