Isuzu Tilt Slide FYJ2000 Instruction Manual page 208

4-80
CONTROLS AND INSTRUMENTS
Model with ZF9S1310 Model Manual Transmission
The ZF9S1310 manual transmission requires selection of the low range or the high
range when operating the gearshift lever, unlike the 6-speed transmission.
Fully understand how to operate the gearshift lever and form a habit of operating it
correctly.
Low range
Low range indicator light
Operation Method
When Starting the Vehicle
Single-H shift pattern
Make sure that the low range indicator light
is on in the instrument panel.
After fully pressing the clutch pedal and
while pressing the brake pedal, place
the gearshift lever into the "1 (1st)", "C1
(crawler 1)" or "R1 (reverse 1)" position.
When the gearshift lever is placed into the
"R1 (reverse 1)" position, the back up light
comes on and a warning buzzer sounds in
a model with back up warning.
Double-H shift pattern
Make sure that the low range indicator light
is on in the instrument panel.
After fully pressing the clutch pedal and
while pressing the brake pedal, place the
gearshift lever into the "1 (1st gear)", "C
(crawler)" or "R (reverse)" position. When
the gearshift lever is placed into the "R
(reverse)" position, the back up light comes
on and a warning buzzer sounds in a model
with back up warning.
V