Isuzu Tilt Slide FYJ2000 Instruction Manual page 53

Cargo loading caution
Do not place cargo only at
the front or only at the rear.
Distribute it evenly.
When using supports under
cargo, position them uniformly
along the cargo.
To the greatest extent possible,
do not allow long cargo to
protrude beyond the rear edge
of the cargo bed. Rather, use
supports to raise it at an angle.
Avoid supporting it using just the
front guard frame and the rear
edge of the cargo bed.
Use ropes and tarpaulins to
secure the cargo so it does
not fall off the cargo bed. Use
rubber bands or bungee cords
to prevent the tarpaulins from
flapping in the wind.
Avoid loading cargo too high.
It can cause the vehicle to
tip sideways when it catches
sidewinds and when turning the
vehicle.
IMPORTANT INFORMATION
Incorrect
Loading Heavy Cargo
•
LNU720SH000701
LNU720SH000901
LNU720SH001101
LNU720SH001301
CAUTION
When the cargo is heavy, take
LNU720SH004801
steps to prevent it from slipping and
secure it with wire cables.
2-21
Correct
LNU720SH
LNU720SH
LNU720SH
LNU720SH
LNU720SH0