Isuzu Tilt Slide FYJ2000 Instruction Manual page 481

CAUTION
• Do not apply water directly in order to clean the cab interior. Failure to observe
this precaution can result in malfunction or breakdown of electronic control units
and electrical components, or in rusting of the cab floor.
• Do not apply water from a high-pressure washer nozzle directly to the electric
connectors. Failure to observe this precaution can lead to faulty operation of
electrical system components.
• Do not spray high pressure water at or near the brake valves behind the front
lid. Failure to observe this precaution can lead to faulty operation of the related
components.
• Do not spray water directly at the air conditioning filter area, the air conditioning
piping, or the heater hose connections behind the front lid. Failure to observe
this precaution can result in water entering the cab.
ADVICE
• If automatic washing is used with vehicles having dark or metallic coating, the
painted surfaces can be damaged by the brushes, lose their luster, or be very
noticeably scratched.
• When cleaning the front-lid area, set the air source lever to the "
order to prevent water entering the cab.
• Do not apply water directly to the air conditioning filter, or the connections for
the air conditioning pipe or heater hose inside the front lid. Failure to observe
this precaution can result in water entering the cab.
• Do not apply water to the engine compartment or to electrical components.
Failure to observe this precaution can lead to a poorly starting and operating
engine and problems in electrical system components.
• Ensure that mirrors and the antenna are retracted before washing the vehicle.
• When washing the vehicle, be sure to observe the following precautions to
avoid heat deformation of the plastic parts, mechanical breakage and water
entry into the cab.
- Avoid washing with water jet of high pressure and/or of high temperature.
- Keep the distance of more than 0.4 m (15.75 in) between the washer nozzle
and the vehicle, and hold the nozzle at a right angle to the door glasses.
• Ensure that all detergent is fully washed and wiped away. Particularly in the
case of strong alkaline detergents (typically those for industrial uses), there is a
danger that hairline cracks can develop in lighting-cluster lenses if the vehicle is
operated without detergent being fully wiped away.
SERVICE AND MAINTENANCE
7-153
" position in