Isuzu Tilt Slide FYJ2000 Instruction Manual page 181

CONTROLS AND INSTRUMENTS
Starter Switch
LOCK
ACC
ON
START : The engine is started in this
• If the key cannot be turned
from the "LOCK" position to the
"ON" position, lightly move the
steering wheel clockwise and
counterclockwise while trying to turn
the key.
: In this position, the key can be
inserted or removed.
Remove the key, and turn the
steering wheel until it locks. The
steering wheel will be locked
to help prevent theft. To place
the starter switch in the "LOCK"
position, press and hold the key
in the "ACC" position and then
turn it to the "LOCK" position.
: In this position, the audio and
other accessories can be used
with the engine stopped.
: The key stays in this position
while the engine is running.
This position is also used for
preheating before engine start.
position. Release the key as
soon as the engine has started.
The key automatically returns to
the "ON" position.
NOTE
4-53