Isuzu Tilt Slide FYJ2000 Instruction Manual page 340

7-12
SERVICE AND MAINTENANCE
To Tilt the Cab Up
Securely apply the parking brake, set the
gearshift lever in neutral, and then place
chocks against the wheels.
Do not tilt the cab when the gear is not in
neutral.
1. Pull the lock lever (4) with your right
hand and turn down the tilt lock lever
(3) by pulling it toward you with your
left hand to release the cab lock. A
buzzer will sound. The cab will rise
slightly at this time.
2. Set the pump lever in the "tilt up"
position (1).
• Do not stop tilting the cab mid-way
except in an emergency. Doing so
may cause the cab tilt mechanism to
break down.
• Never get under a cab that was
stopped mid-way during tilting. The
cab may drop down.
• Make sure that no part of your body
is beneath the cab while it is being
tilted. You may get caught under the
cab.
3. Hold the tilt switch (2) pressed until
the cab stops rising. When the cab is
fully tilted, the buzzer will stop.
WARNING