Isuzu Tilt Slide FYJ2000 Instruction Manual page 387

SERVICE AND MAINTENANCE
Checking the Brake Chamber
Cap
Wheel Hub Bearing
HCU7C0SH009101
Axle Shaft Bolts or Nuts
Check to ensure that the cap of the brake
chamber is securely closed.
CAUTION
• If you do not close the cap, the
brake chamber may become
damaged due to water ingress.
The bearing grease must be changed
according to the maintenance schedule.
This involves disassembly work, so ask
your Isuzu Dealer to carry out a grease
change.
Maintenance Schedule
→ Refer to page 7-163
Recommended Fluids, Lubricants and
Diesel Fuels → Refer to page 7-188
Check to see if any of the axle shaft bolts
or nuts on the rear axle are loose.
Tightening torque
R130/RT210
type axles (17 - 20 kgf·m/123 - 145 lb·ft)
RS23/RT40
type axles (18 - 26 kgf·m/130 - 188 lb·ft)
7-59
V
167 - 196 N·m
177 - 255 N·m