Isuzu Tilt Slide FYJ2000 Instruction Manual page 127

DOORS, WINDOWS AND SEATS
Two-Point Seat Belt (Center Seat)
Pull until
adjusted to
a snug fit
To Fasten
1. Sit on the seat in the correct position.
2. Pull out the latch plate side of the belt
a little longer than necessary. (Placing
the latch plate at right angles with the
belt makes this easier.)
3. After checking that there are no twists
in the belt, insert the latch plate into
the buckle until it clicks.
4. Position the seat belt across the lap
as low as possible on the hips. Pull
the fold-back end of the belt (upper
side) until the belt is adjusted to a
snug fit.
MFU830SH002301
3-33