Isuzu Tilt Slide FYJ2000 Instruction Manual page 382

7-54
SERVICE AND MAINTENANCE
Checking the Brake Linings for Wear
or
HCU7C0SH008801
F066/F075/R130/RT210 Type Axles
1. Remove the rubber plug from the
inspection hole in the brake dust
cover.
2. The notch in the side of the lining
is stepped, so check to see if the
step still exists. Also check the side
surfaces of the lining for cracks,
flaking or other damage.
3. The lining must be replaced if the
step is lost or there are cracks or
flaking on the side surfaces. Have
the replacement carried out by the
nearest Isuzu Dealer.
FG941 (MFS66) /RS23/RT40 Type
Axles
1. Remove the rubber plug from the
inspection hole in the brake dust
cover.
2. Check the thickness of the lining.
3. If the thickness of the lining is 6.3 mm
(0.25 in) or less, or has cracks or is
flaking, the lining must be replaced.
Contact the nearest Isuzu Dealer.