Isuzu Tilt Slide FYJ2000 Instruction Manual page 559

Replacing the Side Turn Signal Light
IN CASE OF EMERGENCY
1. Loosen one screw and remove the
side turn signal light by sliding it
with the base toward the front of the
vehicle.
2. Turn the socket counterclockwise
to remove it. Pull off the bulb from
the socket and replace with a new
bulb. Push in the bulb and turn it
counterclockwise to remove.
3. To install the lights, perform the same
sequence of operations in reverse
taking care of the following point:
• Turn the socket clockwise to
securely lock it.
ADVICE
• If the socket is not locked securely,
water could get inside the light and
lead to a breakdown.
8-31