Isuzu Tilt Slide FYJ2000 Instruction Manual page 354

7-26
SERVICE AND MAINTENANCE
When changing oil only
When changing oil and filter
ADVICE
• Use the oil quantity indicated above only as a guideline when changing the
engine oil. After changing the oil, ensure that it is at the proper level.
WARNING
• Flames or other heat sources near spilled oil can cause a fire. Make sure to
wipe it all up.
• Do not leave flammable items, such as rags or gloves in the engine
compartment beneath the cab. They could be the cause of a fire. Also, do not
forget your tools.
ADVICE
• Avoid revving up the engine, as it could damage the engine.
• Do not fill the oil over the "MAX" on the oil dipstick. Overfilling could damage the
engine.
Capacity [Reference value] liters (US gal./Imp gal.)
19.0 - 24.0 (5.02 - 6.34 / 4.18 - 5.28)
25.5 - 30.5 (6.74 - 8.06 / 5.61 - 6.71)
4. Install the oil dipstick and the filler
cap, wait for at least 5 minutes after
filling up the oil, then start and idle
the engine. While the engine is idling,
check to see if any oil leaks around
the oil filter or drain plug.
5. Stop the engine. After 20 to 30
minutes, check the oil level using the
oil dipstick.