Isuzu Tilt Slide FYJ2000 Instruction Manual page 350

7-22
SERVICE AND MAINTENANCE
ADVICE
• Use the oil quantities indicated below only as guidelines when changing the
engine oil. After changing the oil, ensure that its level is as required.
• If the engine oil level is above the "MAX" mark on the oil dipstick, the engine
may break down. If the oil level is beyond the "MAX" level, then change the oil.
• Fuel gradually gets mixed with the engine oil, causing the engine oil to become
thin. Replace the engine oil according to the maintenance schedule.
NOTE
• Perform all engine oil level checks on a level surface before starting the engine.
• The oil level cannot be checked correctly when the engine is running.
• Fuel will gradually become mixed with the engine oil, and the engine oil level
will rise beyond the original level.
• When the engine has been run, wait for 20 to 30 minutes after stopping the
engine and then check the oil level.
Maintenance Schedule
→ Refer to page 7-163
Recommended Fluids, Lubricants and
Diesel Fuels → Refer to page 7-188