Isuzu Tilt Slide FYJ2000 Instruction Manual page 287

1
(For more than
2 seconds)
2
Flashes
3
H M
NOTE
• If the time adjustment operation is suspended for 15 seconds or more, the time
adjustment mode will be cancelled. Restart the process from the beginning.
• To cancel the alarm, press the alarm button. Make sure the "
longer displayed.
• If the vehicle is not to be used for an extended period, cancel the alarm.
COMFORT AND CONVENIENCE
Setting the Alarm
The alarm will sound at the time you have
set. To set the alarm, you must press and
hold the alarm button for 2 seconds or
more to make the time display and the " "
icon flash.
1. Press the alarm button for 2 seconds
or more and check that the time
display is flashing. Then, press the
tuning buttons (the -marked button
adjusts hours; the -marked button
adjusts minutes) to change the time.
2. Change the display to the desired
time, and wait until the current time
returns.
3. Press the alarm button and check that
the " " icon is steadily on. To stop the
alarm, press any button.
LNU850SH005301
5-41
" icon is no