The wheel hub bearing oil must be changed according to the Maintenance Schedule.
Changing the Front Wheel Hub Bearing Oil
SERVICE AND MAINTENANCE
Front Wheel Hub Bearing Oil
MER
Maintenance Schedule
→ Refer to page 7-163
Recommended Fluids, Lubricants and
Diesel Fuels
→ Refer to page 7-188
Maintenance Schedule for FG941
(MFS66)/RS23/RT40 Type Axle
→ Refer to page 7-185
1. Turn the wheel until the drain plug (1)
faces straight down.
2. Place a container under the drain plug
to receive oil.
3. Remove the drain plug to discharge
the wheel hub bearing oil into the
container.
4. Install the drain plug. Refill the wheel
hub bearing with the specified gear oil
through the filler hole (2).
5. Check that the oil level is correct.
ADVICE
•
It takes a relatively long time for the
oil to enter the bearing and its level
to stabilize.
Per wheel oil quantity [reference value]
0.40 liters (0.11 US gal./0.09 Imp gal.)
7-117