Isuzu Tilt Slide FYJ2000 Instruction Manual page 184

4-56
CONTROLS AND INSTRUMENTS
Switching between High Beam and
Low Beam
With the headlights on, move the lever
forward and rearward to switch between
the high beam and low beam.
Moving the lever forward selects high
beam; moving the lever rearward selects
low beam. While the headlights are on high
beam, the high beam indicator light on the
instrument panel remains on.
NOTE
• Use low beam whenever there are
vehicles ahead in the same lane or
oncoming vehicles on the opposing
lane.
When the Bulb Does not Come On
→ Refer to page 8-24
High Beam Flash (Passing Signal)
By lightly pulling the light control switch
lever and releasing it, the high beam
comes on and off. At the same time, the
high beam indicator light on the instrument
panel comes on and off. Use this function
as a signal for passing a vehicle or other
purposes.