Isuzu Tilt Slide FYJ2000 Instruction Manual page 453

SERVICE AND MAINTENANCE
7. Install the filter, holder, and spring in
that sequence, and then close the
cap.
8. Remove the strainer from the
replenishing port, check to see if dust
or other matter is adhering to it, and
clean it. Check to see if the fluid level
is satisfactory.
• During the filter cleaning, be
sufficiently careful not to let dust
or other foreign matter get inside
the tank. Foreign matter getting in
the tank will cause power steering
system failure.
Cab Tilt Pump Oil
Change the cab tilt pump oil according to
the maintenance schedule. Oil replacement
requires disassembling of the relevant
components, so you should have it done by
your Isuzu Dealer.
Maintenance Schedule
Recommended Fluids, Lubricants and
Diesel Fuels
ADVICE
→ Refer to page 7-163
→ Refer to page 7-188
7-125