Isuzu Tilt Slide FYJ2000 Instruction Manual page 446

7-118
SERVICE AND MAINTENANCE
Rearward Rear Axle of FXM Model
Check and change the wheel hub bearing oil according to the Maintenance Schedule.
Rear Wheel Hub Bearing Oil
Checking the oil level
V
Maintenance Schedule
→ Refer to page 7-163
Recommended Fluids, Lubricants and
Diesel Fuels → Refer to page 7-188
Maintenance Schedule for FG941
(MFS66)/RS23/RT40 Type Axle
→ Refer to page 7-185
Checking the Oil Level
Check the oil level through the inspection
window in the hub. Confirm that the oil
surface reaches the bottom edge of the
cap.
If the oil level is too low, remove the cap
from the inspection window in the hub, and
add oil until the oil surface reaches the
bottom edge of the window opening.
Changing the Oil
Changing the wheel hub bearing oil
involves disassembly work, so have it done
by your Isuzu Dealer.