Isuzu Tilt Slide FYJ2000 Instruction Manual page 137

4-9
CONTROLS AND INSTRUMENTS
Speedometer
The speedometer indicates the vehicle
speed in km/h. Each time you press the
select / reset button lightly with the starter
switch in the "ON" position, the odometer
/ trip meter shows "ODO", "TRIP A" and
"TRIP B" in this sequence and one at a
time to indicate the selected meter.
Odometer
The total distance traveled by your
vehicle is indicated in km. When 999,999
kilometers are exceeds, "B" is displayed.
Trip Meter
Use the trip meter to know the distance
between the specific points or the distance
traveled during a specific time frame.
The number on the left side of the decimal
point is the distance in km, while the
number on the right side is the distance in
100 m. In addition, two separate distances
can be associated with "TRIP A" and "TRIP
B". Use the two trip meters by switching
between "TRIP A" and "TRIP B" as
appropriate.
If you want to reset the trip meter, use the
select / reset button to select and display
the trip meter that you want to reset. Then,
hold the button pressed for at least one
second.