Isuzu Tilt Slide FYJ2000 Instruction Manual page 548

8-20
IN CASE OF EMERGENCY
ADVICE
• Make sure that the needle on the engine coolant temperature gauge is below
"C" before adding engine coolant. Adding engine coolant when the engine is not
sufficiently cool could cause a breakdown in the engine or damage it.
• When tap water only has been used for engine coolant in an emergency, adjust
the engine coolant concentration as soon as possible.
ADVICE
• When the cooling fan for the radiator
is not turning, turn off the engine
immediately.
4. Check the engine coolant level in
the sub-tank after the engine has
sufficiently cooled. If it is insufficient,
add engine coolant. Also, check to
see if the fan belt is loose or has been
damaged.
5. Make sure no dust, vinyl material, or
other matter is in front of the radiator,
and remove any if there is.
6. If engine coolant is leaking, or the
engine coolant level is proper and no
engine coolant is leaking, contact the
nearest Isuzu Dealer.
Engine Coolant → Refer to page 7-38
Fan Belt → Refer to page 7-34